교원검색

Profile

Profile.
Name	Dong-Woo Suh
Organization	Dept of Ferrous Technology
Telephone	054-279-9030
E-mail	dongwoo1@postech.ac.kr
Homepage	http://cml.postech.ac.kr/

Education

1995.03 ~ 2000.02 서울대학교 (박사-Metallugical Engineering)
1993.03 ~ 1995.02 서울대학교 (석사-Metallugical Engineering)
1990.03 ~ 1993.02 서울대학교 (학사-Metallugical Engineering)

Career

2009.09 ~ 2010.09 : POSTECH 철강대학원
2003.01 ~ 2009.08 : 한국기계연구원 부설 재료연구소
2002.03 ~ 2002.12 : 포스코 기술연구원
2001.03 ~ 2002.02 : NATIONAL INSTITUTE FOR MATERIALS SCIENCE, JAPAN
2000.06 ~ 2001.02 : 서울대학교 신소재 공동연구소

Profession

철강재료
상변태
물리야금

International

Acceleration of bainitic transformation in 028C38Mn15Si steel utilizing chemical heterogeneity, Scripta Materialia, , 239, - (2024)
Development of functionally graded austenitic lightweight steel through electrically assisted pressure solidstate joining, Materials Science and Engineering A, , 891, - (2024)
Influence of Silicon Contents on the Microstructure and Tensile Properties of Quenching and Partitioning QP Processed Low Carbon Steel, ISIJ International, , 64, 412-420 (2024)
Hydrogen Diffusion in Al–SiCoating Layer of PressHardening Steel, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, , 55, 4304-4309 (2024)
Influence of heating rate on the evolution of postannealed microstructure in NbTi microalloyed steel Interplay with initial coldrolled microstructure, Journal of Materials Research and Technology, , 33, 8451-8459 (2024)
Ultrastrong and ductile steel welds achieved by fine interlocking microstructures with filmlike retained austenite, Nature Communications, , 15, - (2024)
Influence of Partial Replacement of Co with Cu on Isothermal Transformation Kinetics in FerriticMartensitic Heat‐Resistant Steel, Steel Research International, , 94, - (2023)
Observation of multiscale damage evolution in transformationinduced plasticity steel under bending condition, Materials Today Communications, , 34, - (2023)
Hydrogen Trapping Characteristics and Mechanical Degradation in a Duplex Stainless Steel, METALS AND MATERIALS INTERNATIONAL, , 29, 126-134 (2023)
Influence of starting microstructure on the microstructure evolution during annealing and the yield strength in NbTi microalloyed coldrolled steel, Materials Science and Engineering A, , 886, 145686- (2023)
Interplay of Nb addition and annealing temperature and its influence on microstructure and tensile properties of multiphase steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 833, - (2022)
Effect of molybdenum on interfacial properties of titanium carbide reinforced Fe composite, JOURNAL OF MATERIALS SCIENCE amp TECHNOLOGY, , 107, 252-258 (2022)
Microstructure characterization of polycrystalline yttrium iron garnets YIGs sintered from the calcined solgel powder, Materials Characterization, , 194, - (2022)
Temperaturedependent universal dislocation structures and transition of plasticity enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy, International Journal of Plasticity, , 148, 103148- (2022)
Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite, Acta Materialia, , 223, 117506- (2022)
Room temperature quenching and partitioning RTQampP processed steel with chemically heterogeneous initial microstructure, Materials Science and Engineering A, , 851, 143651- (2022)
Prediction of Retained Austenite Fraction in QuenchingandPartitioning QampP Steels Using the Gibbs Energy Balance Approach, Metals and Materials International, , 28, 2059-2067 (2022)
Tantalum and molybdenum barriers to prevent carbon diffusion in spark plasma sintered tungsten, SCRIPTA MATERIALIA, , 196, - (2021)
Tensile Properties and StretchFlangeability of TRIP Steels Produced by Quenching and Partitioning QampP Process with Different Fractions of Constituent Phases, ISIJ INTERNATIONAL, , 61, 572-581 (2021)
Influence of Isothermal Treatment Prior to Initial Quenching of QampP Process on Microstructure and Mechanical Properties of Medium Mn Steel, ISIJ INTERNATIONAL, , 61, 518-526 (2021)
Enhancement of ballistic performance enabled by transformationinduced plasticity in highstrength bainitic steel, Journal of Materials Science and Technology, , 84, 219-229 (2021)
Tibearing lightweight steel with large high temperature ductility via thermally stable multiphase microstructure, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 808, - (2021)
Suppression of adiabatic shear band formation by martensitic transformation of retained austenite during split Hopkinson pressure bar test for a highstrength bainitic steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 814, - (2021)
Influence of chronological control of transformation on the microstructure and mechanical properties of complex phase steels, SCRIPTA MATERIALIA, , 200, - (2021)
Enhanced ductility of asquenched martensite by highly stable nanosized austenite, SCRIPTA MATERIALIA, , 201, - (2021)
Influence of Si and Al contents and isothermal treatment condition on the microstructure and tensile properties in ultrahigh strength Fe02C20Mn martensitebainite complex phase steels, KOREAN JOURNAL OF METALS AND MATERIALS, , 59, 602-612 (2021)
Influence of Microstructure Constituents on the HydrogenInduced Mechanical Degradation in UltraHigh Strength Sheet Steels, METALS AND MATERIALS INTERNATIONAL, , 27, 3959-3967 (2021)
Hardness and Transverse Rupture Strength of TiCReinforced SKD11 Steel Matrix Composite, Metals and Materials International, , 26, 302-309 (2020)
Role of grain size on deformation microstructures and stretchflangeability of TWIP steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 773, - (2020)
Role of retained austenite on adiabatic shear band formation during high strain rate loading in highstrength bainitic steels, Materials Science and Engineering A, , 778, 139118- (2020)
Effect of the magnetic transition of austenite phase on austenitetoepsilon martensitic transformation in FeMn binary alloys, MATERIALS CHARACTERIZATION, , 163, - (2020)
Quenching and partitioning QP processed medium Mn steel starting from heterogeneous microstructure, Materialia, , 12, - (2020)
Analysis of transformation stasis by the Gibbs energy balance GEB approach modified to consider carbon redistribution into remaining austenite, CALPHADCOMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 70, - (2020)
Effect of tempering conditions on adiabatic shear banding during dynamic compression and ballistic impact tests of ultrahighstrength armor steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 792, - (2020)
A new class of lightweight stainless steels with ultrahigh strength and large ductility, SCIENTIFIC REPORTS, , 10, - (2020)
Isothermal transformation of austenite to ferrite and precipitation behavior in 9Cr15Mo125Co01CVNb heatresistant steel, MATERIALS CHARACTERIZATION, , 170, - (2020)
Influence of Initial Pearlite Morphology on the Microstructure Evolution During Heat Treatment of 10C15Cr Steel, METALS AND MATERIALS INTERNATIONAL, , 25, 9-17 (2019)
Effect of Prior Austenite Grain Size on Hole Expansion Ratio of Quenching and Partitioning Processed MediumMn Steel, JOMJOURNAL OF THE MINERALS METALS MATERIALS SOCIETY, , 71, 1366-1374 (2019)
Austenite morphology and resistance to hydrogen embrittlement in medium Mn transformationinduced plasticity steel, SCRIPTA MATERIALIA, , 169, 52-56 (2019)
Influence of Carbon Content and Isothermal Heat Treatment Temperature on the Microstructure and Mechanical Properties of UltraHigh Strength Bainitic Steels, KOREAN JOURNAL OF METALS AND MATERIALS, , 57, 335-342 (2019)
Influence of initial microstructures on intercritical annealing behaviour in a medium Mn steel, MATERIALS SCIENCE AND TECHNOLOGY, , 35, 2092-2100 (2019)
Screw dislocation driven martensitic nucleation A step toward consilience of deformation scenario in fcc materials, ACTA MATERIALIA, , 174, 342-350 (2019)
Partiallyrecrystallized ferrite grains and multiple plasticity enhancing mechanisms in a medium Mn steel, MATERIALS CHARACTERIZATION, , 155, - (2019)
Hydrogen Behavior in TiAdded Reduced Activation FerriticMartensitic Steels, METALS AND MATERIALS INTERNATIONAL, , 27, 425-435 (2019)
Tempering Behavior of TiCReinforced SKD11 Steel Matrix Composite, METALS AND MATERIALS INTERNATIONAL, , 24, 644-651 (2018)
Effects of Molybdenum Addition on Hydrogen Desorption of TiC PrecipitationHardened Steel, METALS AND MATERIALS INTERNATIONAL, , 24, 532-536 (2018)
Design of online spheroidization process for 10C15Cr bearing steel and microstructure analysis, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 49, 1782-1794 (2018)
Microstructure and mechanical properties of austempered mediumcarbon spring steel, METALS AND MATERIALS INTERNATIONAL, , 24, 693-701 (2018)
Medium Mn transformationinduced plasticity steels Recent progress and challenges, SCRIPTA MATERIALIA, , 126, 63-67 (2017)
Atomistic investigations of κcarbide precipitation in austenitic FeMnAlC lightweight steels and the effect of Mo addition, SCRIPTA MATERIALIA, , 127, 97-101 (2017)
TiCSKD11 함침 복합재의 온도에 따른 인장 특성과 파괴거동 변화, KOREAN JOURNAL OF METALS AND MATERIALS, , 55, 156-164 (2017)
Oxidation behaviour of Sicontaining lowcarbon steels, MATERIALS SCIENCE AND TECHNOLOGY, , 33, 991-997 (2017)
Tensile test criterion of transformationinduced elasticity and plasticity alloys for loaddisplacement measurement, JOURNAL OF ALLOYS AND COMPOUNDS, , 711, 305-311 (2017)
Influence of heating rate on annealing and reverse transformation behavior of TRIP steels having martensite as starting microstructure, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 48, 5217-5222 (2017)
Hydrogen permeation in coldrolled highMn twinninginduced plasticity steels, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 48, 5211-5216 (2017)
Quantummechanical analysis of effect of alloying elements on εmartensite start temperature of steels, Scientific Reports, , 7, - (2017)
Numerical modelling of moving interfaces under local equilibrium conditions, CALPHADCOMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 59, 164-170 (2017)
Liquid Zn assisted embrittlement of advanced high strength steels with different microstructures, METALS AND MATERIALS INTERNATIONAL, , 22, 187-195 (2016)
Surface Selective Oxidation of SnAdded CMnSi TRIP Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 1705-1719 (2016)
Heat treatment response of TiCreinforced steel matrix composite, METALS AND MATERIALS INTERNATIONAL, , 22, 935-941 (2016)
Influence of the Initial Microstructure on the Reverse Transformation Kinetics and Microstructural Evolution in TransformationInduced PlasticityAssisted Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 5352-5361 (2016)
Influence of initial microstructure on the heat treatment response and tensile properties of TRIPassisted steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 5259-5265 (2016)
Surface Selective Oxidation of SnAdded CMnSi TRIP Steel vol 47 pg 1705 2016, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 2536-2536 (2016)
Ausforming of medium carbon steel, MATERIALS SCIENCE AND TECHNOLOGY, , 31, 436-442 (2015)
Pearlite growth rate in FeC and FeMnC steels, MATERIALS SCIENCE AND TECHNOLOGY, , 31, 487-493 (2015)
Cracks in Martensite Plates as Hydrogen Traps in a Bearing Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46, 665-673 (2015)
Observation of microscale surface morphology with microtexture development during plane strain tensile deformation in AZ31 magnesium alloy, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 12-17 (2015)
Effect of aluminium on hydrogen permeation of highmanganese twinninginduced plasticity steel, SCRIPTA MATERIALIA, , 99, 45-48 (2015)
Stability of stainlesssteel nanoparticle and water mixtures, POWDER TECHNOLOGY, , 272, 34-44 (2015)
Is low phosphorus content in steel a product requirement, IRONMAKING STEELMAKING, , 42, 259-267 (2015)
Underlying structure of bulky oxide nodule on aluminaforming austenitic stainless steel, SCRIPTA MATERIALIA, , 102, 63-66 (2015)
Nonisothermal kinetics model to predict accurate phase transformation and hardness of 22MnB5 boron steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 626, 67-73 (2015)
Stress development and shape change during press-hardening process using phase-transformation-based finite element analysis, INTERNATIONAL JOURNAL OF PLASTICITY, , 73, 142-170 (2015)
Precipitation sequence and its effect on age hardening of alumina-forming austenitic stainless steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 645, 72-81 (2015)
Precipitation sequence and its effect on age hardening of aluminaforming austenitic stainless steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 645, 72-81 (2015)
Transformation Plasticity in BoronBearing Low Carbon Steel, METALS AND MATERIALS INTERNATIONAL, , 21, 799-804 (2015)
Stress development and shape change during presshardening process using phasetransformationbased finite element analysis, INTERNATIONAL JOURNAL OF PLASTICITY, , 73, 142-170 (2015)
Variant selection during mechanically induced martensitic transformation of metastable austenite by nanoindentation, SCRIPTA MATERIALIA, , 104, 13-16 (2015)
Toughness anisotropy in X70 and X80 linepipe steels, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 439-446 (2014)
Hydrogen and aluminium in highmanganese twinninginduced plasticity steel, SCRIPTA MATERIALIA, , 80, 9-12 (2014)
Thermomechanicalmetallurgical modeling for hotpress forming in consideration of the prior austenite deformation effect, INTERNATIONAL JOURNAL OF PLASTICITY, , 58, 154-183 (2014)
Hydrogen diffusion and the percolation of austenite in nanostructured bainitic steel, PROCEEDINGS OF THE ROYAL SOCIETY AMATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, , 470, - (2014)
Critical Assessment 2 Hydrogen induced fracture in austenitic highmanganese TWIP steel, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 1131-1134 (2014)
Fabrication of an ultrafinegrained structure by a compositional pinning technique, ACTA MATERIALIA, , 77, 236-247 (2014)
Dissolution Behaviour of NbC during Slab Reheating, ISIJ INTERNATIONAL, , 54, 1677-1681 (2014)
Austenite in TransformationInduced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , , - (2014)
Interaction of aluminium with hydrogen in twinninginduced plasticity steel, SCRIPTA MATERIALIA, , 87, 9-12 (2014)
Effect of copper addition on the characteristics of highcarbon and highchromium steels, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 614, 36-44 (2014)
Effect of constituent phase on mechanical properties of 9Cr1WVTa reduced activation ferriticmartensitic steels, JOURNAL OF NUCLEAR MATERIALS, , 455, 421-425 (2014)
Effect of second phase on the deformation and fracture behavior of multiphase lowdensity steels, JOM, , 66, 1837-1844 (2014)
Selective oxidation of Al rich FeMnAlC low density steels, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 1805-1814 (2014)
Segregation of phosphorus to ferrite grain boundaries during transformation in FeP alloy, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 105, 1166-1172 (2014)
Solubility of carbon in tetragonal ferrite in equilibrium with austenite, SCRIPTA MATERIALIA, , 68, 195-198 (2013)
MediumAlloy ManganeseRich Transformationinduced Plasticity Steels, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44, 286-293 (2013)
Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns, SCRIPTA MATERIALIA, , 68, 245-248 (2013)
Lowdensity steels, SCRIPTA MATERIALIA, , 68, 337-338 (2013)
Microstructure and tensile behavior of duplex lowdensity steel containing 5 mass aluminum, SCRIPTA MATERIALIA, , 68, 365-369 (2013)
Effect of aluminium on hydrogeninduced fracture behaviour in austenitic FeMnC steel, PROCEEDINGS OF THE ROYAL SOCIETY AMATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, , 469, - (2013)
Interphase precipitation in TiNb and TiNbMo bearing steel, MATERIALS SCIENCE AND TECHNOLOGY, , 29, 309-313 (2013)
FeAlMnC lightweight structural alloys a review on the microstructures and mechanical properties, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, , 14, 14205- (2013)
Kinetic transition during the growth of proeutectoid ferrite in FeCMnSi quaternary steel, METALS AND MATERIALS INTERNATIONAL, , 19, 153-158 (2013)
Austenite stability and heterogeneous deformation in finegrained transformationinduced plasticityassisted steel, SCRIPTA MATERIALIA, , , 933-936 (2013)
Effects of Mn Si and Cr addition on the dissolution and coarsening of pearlitic cementite during intercritical austenitization in Fe1massC alloy, MATERIALS CHARACTERIZATION, , 81, 56-67 (2013)
Theory for hydrogen desorption in ferritic steel, COMPUTATIONAL MATERIALS SCIENCE, , 79, 36-44 (2013)
Modelling coarsening behaviour of TiC precipitates in high strength low alloy steels, MATERIALS SCIENCE AND TECHNOLOGY, , 29, 1074-1079 (2013)
Mechanical Anisotropy in steels for pipelines, ISIJ INTERNATIONAL, , 53, 1305-1314 (2013)
Esimation of phase fraction in dual phase steel using microscopic characterizations and dilatometric analysis, MATERIALS CHARACTERIZATION, , 84, 205-215 (2013)
Effect of hydrogen on the surface energy of ferrite and austenite, CORROSION SCIENCE, , 77, 379-384 (2013)
Effect of nickel content on the neutron irradiation embrittlement of NiMoCr steels, METALS AND MATERIALS INTERNATIONAL, , 19, 1203-1208 (2013)
Stability of Ti MC M Nb V Mo and W carbide in steels using firstprinciples calculations, ACTA MATERIALIA, , 60, 208-217 (2012)
More complete theory for the calculation of the martensitestart temperature in steels, ISIJ INTERNATIONAL, , 52, 164-166 (2012)
Growth kinetics of proeutectoid ferrite in Fe01C15Mn1Si quaternary and Fe01C15Mn1Si02Al quinary alloys, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1-10 (2012)
Spot weldability of TRIP assisted steels with high carbon and aluminium contents, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, , 17, 92-98 (2012)
Critical assessment Martensitestart temperature for the gamma to epsilon transformation, CALPHADCOMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 36, 16-22 (2012)
Promoting the coalescence of bainite platelets, SCRIPTA MATERIALIA, , 66, 951-953 (2012)
Bainite Fragmentation of crystallographically homogeneous domains, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 103, 476-482 (2012)
Role of delamination and crystallography on anisotropy of Charpy toughness in APIX80 steel, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 546, 314-322 (2012)
Analysis of transformation plasticity in steel using a finite element method coupled with a phase field model, PLOS ONE, , 7, E35987- (2012)
Influence of silicon in low density FeCMnAl steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1731-1735 (2012)
Effect of deformation on hydrogen trapping and effusion in TRIPassisted steel, ACTA MATERIALIA, , 60, 4085-4092 (2012)
Experiments to separate the effect of texture on anisotropy of pipeline steel, Materials Science and Engineering A, , 556, 601-606 (2012)
Electrochemical hydrogen permeation measurement through TRIP steel under loading condition of phase transition, ELECTROCHEMISTRY COMMUNICATIONS, , 24, 112-115 (2012)
Retention of deltaferrite in aluminiumalloyed TRIPassisted steels, PROCEEDINGS OF THE ROYAL SOCIETY AMATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, , 468, 2904-2914 (2012)
Oxidation of silicon containing steel, IRONMAKING STEELMAKING, , 39, 599-604 (2012)
Displacive Phase Transformation and Surface Effects Associated with Confocal Laser Scanning Microscopy, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 4520-4524 (2012)
Austenitizing temperature and hardenability of lowcarbon boron steels, SCRIPTA MATERIALIA, , 64, 1118-1120 (2011)
Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr, SCRIPTA MATERIALIA, , 65, 245-248 (2011)
A Finite Element Modeling for Dilatometric Nonisotropy in Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 2094-2106 (2011)
Finite element analysis of dimensional nonisotropy during phase transformation in microstructurally banded steel, SCRIPTA MATERIALIA, , 65, 569-572 (2011)
Influence of Al on the microstructural evolution and mechanical behavior of low carbon manganese transformationinduced plasticity steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 397-408 (2010)
Strain partitioning and mechanical stability of retained austenite, SCRIPTA MATERIALIA, , 63, 297-299 (2010)
Dual orientation and variant selection during diffusional transformation of austenite to allotriomorphic ferrite, JOURNAL OF MATERIALS SCIENCE, , 45, 4126-4132 (2010)
Influence of Al on Microstructure and Mechanical Behavior of CrContaining TransformationInduced Plasticity Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 3276-3281 (2010)
Microstructure and Mechanical Behaviors of 01C13Mn Metastable Austenitic Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40A, 264-268 (2009)
Effects of annealing conditions on microstructure and mechanical properties of low carbon manganese transformationinduced plasticity steel, METALS AND MATERIALS INTERNATIONAL, , 15, 909-916 (2009)
A Microstructurebased Analysis for Transformation Induced Plasticity and Mechanically Induced Martensitic Transformation, MATERIALS SCIENCE AND ENGINEERING ASTRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 485, 224-233 (2008)
Dilatometric Analysis of Austenite Formation during Intercritical Annealing, METALS AND MATERIALS INTERNATIONAL, , 14, 275-282 (2008)
Influence of Cr and Ni on Microstructural Evolution during Heat Treatment of Low Carbon TRIP steels, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 39A, 2015-2019 (2008)
Diffusion Controlled Recrystallization and Grain Growthinduced Plasticity of Steel under Externally Applied Stress, PHILOSOPHICAL MAGAZINE, , 88, 1811-1824 (2008)
Effect of Molybdenum and Chromium on Hardenability of Lowcarbon Boronadded Steels, METALS AND MATERIALS INTERNATIONAL, , 14, 667-672 (2008)
Effects of Phosphorous Addition on Mechanical Properties and Retained Austenite Stability of 015C15Mn15Al TRIPaided Cold Rolled Steels, METALS AND MATERIALS INTERNATIONAL, , 13, 13-19 (2007)
Plastic Strain due to Isothermal Transformation from Austenite to Ferrite in IF and Low Carbon Steels, MATERIALS TRANSACTIONS, , 48, 882-885 (2007)
Dilatometric Analysis of Austenite Decomposition considering the Effect of Nonisotropic Volume Change, ACTA MATERIALIA, , 55, 2659-2669 (2007)
Influence of Partial Replacement of Si by Al on the Change of Phase Fraction during Heat Treatment of TRIP Steels, SCRIPTA MATERIALIA, , 57, 1097-1100 (2007)
Dilatometric Analysis of Phase Fraction during Austenite Decomposition into Banded Microstructure in Low Carbon Steel, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 38A, 2963-2973 (2007)
Diffusion Controlled Transformation Plasticity of Steel under Externally Applied Stress, PHILOSOPHICAL MAGAZINE, , 87, 159-176 (2007)
Calculation of transformation plasticity during coherent transformation of steel, ISIJ INTERNATIONAL, , 46, 341-343 (2006)
Deformation behaviors of 6061 and 7075 aluminum tubes at elevated temperatures for warm hydroforming, Materials Science Forum, , 475-4, 373-376 (2005)
Limit of ferrite grain refinement by severe plastic deformation of austenite, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 1057-1060 (2005)
Variant selection in mechanicallyinduced martensitic transformation of metastable austenitic steel, ISIJ INTERNATIONAL, , 45, 1217-1219 (2005)
Microstructures and electrical conductivity of CuCa alloys for high efficiency induction motors, MATERIALS SCIENCE FORUM, , 449-4, 685-688 (2004)
Rapid grain growth of hot extruded AlZnMgCuSc alloy during heat treatment, Materials Science Forum, , 449-4, 605-608 (2004)
Analysis of transformation plasticity during bainitic transformation under externally applied stress, METALS AND MATERIALS INTERNATIONAL, , 10, 221-229 (2004)
Effect of initial grain size of austenite on hotdeformed structure of Ni30Fe alloy, METALLURGICAL AND MATERIALS TRANSACTIONS APHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 3399-3408 (2004)
Microstructural evolution of AlZnMgCuSc alloy during hot extrusion and heat treatments, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 155, 1330-1336 (2004)
Effects of pretreatment conditions on warm hydroformability of 7075 aluminum tubes, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 155, 1337-1343 (2004)
Effect of external stress on the orientation distribution of ferrite, SCRIPTA MATERIALIA, , 48, 91-95 (2003)
A Model for transformation plasticity during bainite transformation of steel under external stress, ACTA MATERIALIA, , 51, 4907-4917 (2003)
Evaluation of the deviation angle of ferrite from the KudjumovSachs relationship in a low carbon steel by EBSD, SCRIPTA MATERIALIA, , 46, 375-378 (2002)
Dynamic restoration process of Ni30Fe alloy during hot deformation, ISIJ INTERNATIONAL, , 42, 432-439 (2002)
Evaluation of dislocation density from the flow curves of hot deformed austenite, ISIJ INTERNATIONAL, , 42, 564-566 (2002)
Evaluation of the orientation distribution of intragranular ferrite grains dynamically formed during deformation in a Vadded low carbon steel by EBSD, TEXTURES OF MATERIALS PTS 1 AND 2, , 408-4, 1239-1244 (2002)
Serration of grain boundary in Ni30Fe alloy through high temperature deformation, ISIJ INTERNATIONAL, , 42, 1026-1032 (2002)
Orientation distribution of proeutectoid ferrite nucleated at prior austenite grain boundaries in vanadiumadded steel, ISIJ INTERNATIONAL, , 42, 1321-1323 (2002)
FEM modeling of flow curves for ferritepearlite twophase steels, ISIJ INTERNATIONAL, , 41, 782-787 (2001)

Domestic Journal Papers

General Journal Papers

Boundary Migration Induced Plasticity during Recrytallization and Growth under Applied Stress, MATERIALS SCIENCE FORUM, , 558-5, 533-537 (2007)
Crytallographic Texture in Low Alloy TRIP Steel, MATERIALS SCIENCE FORUM, , 558-5, 1423-1428 (2007)

Conference Proceedings

Invited Talk or Presentations

Utilizing chemical heterogeneity in displacive transformed microstructure , , 0, 0, - (2024)
Influence of Mo2C precipitation strengthening on impact toughness in Invar alloy, , 0, 0, - (2024)
Impact of Ni3TiL12 Precipitation on Strength and CTE of Invar Alloy, , 0, 0, - (2024)
지속가능한 친환경 핵심 소재 철강재료의 현재와 도전, , 0, 0, - (2024)
Hydrogen Embrittlement in Microalloyed Ultra High Strength Press Hardening Steel PHS, , 0, 0, - (2024)
Effect of Chemically Heterogeneous Microstructure on Hydrogen Embrittlement HE in Martensitic Steel, , 0, 0, - (2024)
10Cr 페라이트마르텐사이트계 내열강에서 초기조직이오스테나이트 역변태 거동에 미치는 영향, , 0, 0, - (2024)
잔류원소가 포함된 고강도강에서 미량합금원소가구멍확장성HER에 미치는 영향, , 0, 0, - (2024)
Influence of Microalloying Elements on Hole Expansion Ratio HER in Highstrength Steels, , 0, 0, - (2024)
Influence of Si Contents on the Microstructure and Tensile Properties of Quenching and Partitioning QP Processed LowAlloyed Steels, , 0, 0, - (2024)
Microalloying as a Solution for Mitigating Hydrogen Embrittlement in Ultra High Strength Press Hardening Steel PHS, , 0, 0, - (2024)
Effect of Chemically Heterogeneous Microstructure on Hydrogen Embrittlement in Martensitic Steel, , 0, 0, - (2024)
The Impact of Initial Microstructure on the Yield Strength in NbTi Added ColdRolled Steel, , 0, 0, - (2024)
Effects of Initial Microstructures on Reverse Transformation in 10Cr FerriteMartensite HeatResistant Steel, , 0, 0, - (2024)
Influence of Nb addition on hydrogen trapping characteristics and hydrogen embrittlement in press hardening steel PHS, , 0, 0, - (2024)
Interplay of initial microstructure and heating rate affecting the microstructure evolution during annealing of coldrolled NbTi microalloyed steel, , 0, 0, - (2024)
10Cr 페라이트마르텐사이트 내열강에서의 초기조직이 오스테나이트 역변태 거동에 미치는 영향, , 0, 0, - (2023)
QP강의 인장 특성 및 굽힘성에 대한 Al 함량의 영향, , 0, 0, - (2023)
Influence of silicon contents and process condition on the tensile properties of quenching and partitioning QP processed low carbon steel, , 0, 0, - (2023)
QP 열처리를 적용한 강재의 잔류 오스테나이트 내 탄소 농도에 미치는 파티셔닝 온도의 영향, , 0, 0, - (2023)
화학적으로 불균질한 미세조직이 마르텐사이트 강의 수소취성에 미치는 영향, , 0, 0, - (2023)
Nb과 Ti이 미량 첨가된 냉간압연강에서 가열속도가 미세조직 발현에 미치는 영향, , 0, 0, - (2023)
실리콘 함량과 공정 온도가 QP 열처리를 적용한 저합금강의 인장 강도에 미치는 영향, , 0, 0, - (2023)
Nb첨가 저탄소 냉연 강판의 소둔 과정에서 발생하는 석출과 재결정의 상호작용, , 0, 0, - (2023)
Nb과 Ti이 미량 첨가된 냉간압연강에서 초기조직이 항복강도에 미치는 영향, , 0, 0, - (2023)
Influence of partial replacement of Co with Cu on isothermal transformation kinetics in ferriticmartensitic heat resistant steel, , 0, 0, - (2022)
Influence of partial replacement of Co with Cu on isothermal transformation kinetics in ferriticmartensitic heat resistant steel, , 0, 0, - (2022)
Microstructure and tensile properties of room temperature QP processed 025C – 40Mn – 15Si steel starting from chemically heterogeneous microstructure, , 0, 0, - (2022)
Influence of nanosized austenite on the tensile properties of asquenched martensite, , 0, 0, - (2021)
Influence of Nb addition on the tensile properties in low carbon multiphase steels subjected to annealing at different temperature, , 0, 0, - (2021)
화학적으로 불균일한 마르텐사이트강의 미세조직과 인장성질, , 0, 0, - (2021)
마르텐사이트와 베이나이트로 구성된 복합상의 상변태 거동 및 이에 따른 기계적 특성 변화, , 0, 0, - (2021)
화학적 불균일 미세조직을 활용한 상온QP강의 인장 물성 향상에 관한 연구, , 0, 0, - (2021)
Effect of insitu charging on the hydrogen trapping behavior in SAF 2205 duplex stainless steel, , 0, 0, - (2021)
Microstructure and mechanical properties of QP processed medium Mn steel subjected to isothermal treatment prior to initial quenching , , 0, 0, - (2021)
Ductility improvement of asquenched martensite due to nanosized stable austenite particle evolved from initial cementite, , 0, 0, - (2021)
Effect of insitu hydrogen charging on the hydrogen behavior in SAF 2205 duplex stainless steel, , 0, 0, - (2021)
화학적 불균일 초기 조직을 활용한 중망간 QP강의 미세 조직과 인장 성질, , 0, 0, - (2020)
화학적으로 불균일한 초기 조직을 갖는 중망간 Quenching and Partitioning QP강의 미세 조직과 인장 성질, , 0, 0, - (2020)
Influence of Nb addition on the tensile properties in low carbon multiphase steels subjected to annealing at different temperatures, , 0, 0, - (2020)
Effect of atmosphere on surface decarburization after coiling of hotrolled steel, 2019년도 대한금속재료학회 추계학술대회, 0, 0, - (2019)
Improvement of mechanical properties of QP processed steel by introducing bainitic microstructure, 2019년도 대한금속재료학회 추계학술대회, 0, 0, - (2019)
Mediumcarbon TRIPaided bainitic ferrite steels, MST19, 0, 0, - (2019)
Ti 첨가 RAFM강의 수소거동, 제 33회 첨단구조재료 심포지엄, 0, 0, - (2019)
베이나이트 미세조직을 활용한 중망간 QP강의 기계적 물성 향상, 제 33회 첨단구조재료 심포지엄, 0, 0, - (2019)
Influence of Nb on the sensitivity to hydrogeninduced fracture in 1180 grade high strength steels, 제 13회 철강과학포럼, 0, 0, - (2019)
Influence of temperature and interface condition on surface decarburization and internal oxidation formation in high C steel, 제 13회 철강과학포럼, 0, 0, - (2019)
Improvement of mechanical properties of QP processed steel by introducing bainitic microstructure, 28th INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS METAL 2019, 0, 0, - (2019)
Mechanical Properties of Medium Carbon Complex Phase Steel consisting of Auto Tempered Martensite and Lower Bainite, 28th INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS METAL 2019, 0, 0, - (2019)
고경도 Armor Steel의 TRIP 현상과 ASB형성 거동 연구, 2019 대한금속재료학회 춘계 학술대회, 0, 0, - (2019)
Oxidation behavior of AHSS, ICAS 2018 proceedings, 0, 0, - (2018)
Effect of annealing condition on hole expansion ratio HER of QP processed medium Mn steel, ICAS 2018 proceedings, 0, 0, - (2018)
Influence of initial microstructures on intercritical annealing behavior in a medium Mn steel, 2018년도 대한금속재료학회 추계학술대회 초록집, 0, 0, - (2018)
Microstructural effects on stretchflangeability of QP processed medium Mn steel, 2018년도 대한금속재료학회 추계학술대회 초록집, 0, 0, - (2018)
TiC 입자 강화 Fe계 금속복합소재 열처리에 따른 미세조직과 기계적 성질, 제 32회 첨단구조재료심포지엄 초록집, 0, 0, - (2018)
Microstructure and mechanical properties of austempered mediumcarbon spring steel, 제12회 철강과학포럼, 0, 0, - (2018)
Analysis of mechanical properties on complex phase steel containing bainitic ferrite structure considering the refinement of microstructure, 제12회 철강과학포럼, 0, 0, - (2018)
TiC 입자 강화 Fe계 금속복합소재의 항절력에 미치는 템퍼링 온도의 영향, 2018년도 대한금속재료학회 춘계학술대회 초록집, 0, 0, - (2018)
Evaluation of Hydrogen Embrittlement Mechanisms of EG 1180 TRIP Steel, 대한금속재료학회 추계 학술대회 초록집, 0, 0, - (2017)
베이나이트계 고강도강의 경도와 충격인성에 미치는 탄소함량 및 열처리의 영향, 대한금속재료학회 추계학술대회 초록집, 0, 0, - (2017)
Prediction of austenite fraction during intercritical annealing in mediumMn steels, 제11회 철강과학포럼, 0, 0, - (2017)
베이나이트 불완전 변태 해석 모델, 제11회 철강과학포럼, 0, 0, - (2017)
Si 함유 베이나이트계 초고강도강의 경도와 충격인성에 미치는 탄소함량과 열처리 온도의 영향, 한국군사과학기술학회 종합학술대회 논문집, 0, 0, - (2017)
용융가압함침법으로 제조된 TiCSKD11 복합재의 템퍼링 거동에 미치는 TiC 분율의 영향, 대한금속재료학회 춘계학술대회 초록집, 0, 0, - (2017)
Influence of initial microstructure on the reverse transformation kinetics and microstructure evolution in TRIPassisted steel, TMS 2017, 0, 0, - (2017)
Influence of Si on hydrogeninduced mechanical degradation in medium Mn steel, , 0, 0, - (2016)
초고강도 베이나이트 강재의 충격인성에 미치는 탄소함량의 영향 , , 0, 0, - (2016)
고강도 자동차용 강판에서의 수소취성, , 0, 0, - (2016)
Oxidation behaviour of FeCMnSi Alloy in reheating furnace, , 0, 0, - (2016)
Microstructure and mechanical properties of heat treated TiCsteel matrix composite, , 0, 0, - (2016)
Hydrogen permeation in TWIP steels, , 0, 0, - (2016)
침상형 페라이트 TRIP 강의 소둔 거동에 대한 가열속도의 영향, , 0, 0, - (2016)
용융가압함침법으로 제조된 TiCSKD11 복합재의 템퍼링 거동에 미치는 TiC volume fraction의 영향, , 0, 0, - (2016)
Influence of Al on hydrogen behavior in TWIP steel, , 0, 0, - (2016)
Hydrogen embrittlement of twinning induced plasticity steels, , 0, 0, - (2016)
Austenite in TRIP steel subjected to multiple isothermal heat treatment, , 0, 0, - (2016)
Influence of Si on hydrogeninduced mechanical degradation in medium Mn steel, , 0, 0, - (2016)
용융가압함침법으로 제조된 TiCSKD11 복합재의 템퍼링 거동에 미치는 TiC volume fraction의 영향, , 0, 0, - (2016)
Microstructure and Mechanical Properties of TiCreinforced Steel Matrix Composite, , 0, 0, - (2016)
Influence of alloying element on the coarsening of TiXC in highstrength lowalloy steels, , 0, 0, - (2015)
The effects of the initial microstructure on the reverse transformation kinetics and microstructural evolution in TRIPassisted steel, , 0, 0, - (2015)
TRIPassisted steel의 역변태 거동 및 미세조직 발생에 미치는 초기조직 영향, , 0, 0, - (2015)
High Temperature Oxidation in FeCMnSi Alloy, , 0, 0, - (2015)
Influence of Al on hydrogen behavior in TWIP steel, , 0, 0, - (2015)
Spot welding of Zncoated high strength steels, , 0, 0, - (2015)
Hydrogen permeation behaviour in austenitic TWIP steel, , 0, 0, - (2015)
High Temperature Oxidation in FeCMnSi Alloy, , 0, 0, - (2015)
Hydrogen permeation behaviour in TWIP steels, , 0, 0, - (2015)
Heat treatment responses of particulate TiCreinforced tool steel composites, , 0, 0, - (2015)
Hydrogen permeation behaviour of high Mn TWIP steel, , 0, 0, - (2015)
TiC 입자 강화 Fe계 금속복합소재의 열처리에 따른 특성 분석, , 0, 0, - (2015)
알루미늄이 twinninginduced plasticity 강에서 수소거동에 미치는 영향, , 0, 0, - (2014)
Hydrogen and aluminium in twinninginduced plasticity steel, , 0, 0, - (2014)
마이크로 레이어 조직이 강재의 충격인성에 미치는 영향, , 0, 0, - (2014)
Temperature Stress and Phase Analysis of Spot Welding of High Strength Steels Using Finite Element Simulation, , 0, 0, - (2014)
Thermal Conductivity of Stainless Steelnanofluids, , 0, 0, - (2014)
Pearlite growth in ternary steels, , 0, 0, - (2014)
Effect of hydrogen and aluminium on nanomechancial properties of high Mn austenitic TWIP steels, , 0, 0, - (2014)
Spot weldability of zinccoated high manganese steel, , 0, 0, - (2014)
Stability and Thermal Conductivity of Stainless Steel Nanofluids, , 0, 0, - (2014)
Segregation of phosphorus to ferrite grain boundaries during transformation in FeP alloy, , 0, 0, - (2014)
마이크로 레이어 미세조직을 활용한 충격인성 향상, , 0, 0, - (2014)
Mn 분배를 이용한 초세립강의 제조, , 0, 0, - (2014)
다상조직 저 비중강의 미세조직 및 기계적 거동 분석, , 0, 0, - (2014)
Nanomechanical evaluation of hydrogen and aluminium effect on high Mn TWIP steel, , 0, 0, - (2014)
Liquid metal embrittlement of Zncoated high strength steels, , 0, 0, - (2014)
Segregation of phosphorus to ferrite grain boundaries during transformation in Fe–P alloy, , 0, 0, - (2014)
Analysis of hydrogen thermal desorption in ferrite, , 0, 0, - (2014)
Effect of hydrogen and aluminium on nanomechanical properties of high Mn TWIP steel, , 0, 0, - (2014)
Stability of mixtures of stainless steel nanoparticles and water, , 0, 0, - (2014)
Hydrogen thermal desorption in TRIP steel, , 0, 0, - (2014)
Pearlite growth rate in FeMnC steels, , 0, 0, - (2014)
Effect of Mn Si and Cr addition on the spheroidization of cementite in hypereutectoid Fe1 mass C steel, , 0, 0, - (2013)
Effect of hydrogen on the surface energy of ferrite and austenite, , 0, 0, - (2013)
오스테나이트화 온도에서 냉각 시 FeP 합금의 입계편석 연구, , 0, 0, - (2013)
FeMnAlC 합금의 고온산화 거동 연구, , 0, 0, - (2013)
비입방정 페라이트에서의 탄소고용도, , 0, 0, - (2013)
Thermal and stress analysis of spot welding of high strength steels, , 0, 0, - (2013)
Stability and thermal conductivity of stainless steel Nano fluid, , 0, 0, - (2013)
Theory of hydrogen desorption in ferrite, , 0, 0, - (2013)
Influence of alloying elements on the coarsening of TiMC carbide in highstrength lowalloy steels, , 0, 0, - (2013)
Pearlite growth rate in multicomponent steels, , 0, 0, - (2013)
Solubility of carbon in noncubic ferrite, , 0, 0, - (2013)
Stability and thermal conductivity of stainless steel nano fluid, , 0, 0, - (2013)
Numerical analysis of H thermal desorption in ferrite, , 0, 0, - (2013)
Pearlite growth rate in FeMnC ternary steels, , 0, 0, - (2013)
Oxdiation behavior of FeMnAlC alloy at high temperature, , 0, 0, - (2013)
Thermal Conductivity and Stability of Metallicnanofluids, , 0, 0, - (2013)
Inhomogeneous Deformation in Mnrich TRIPassisted Steel, , 0, 0, - (2013)
Influence of Mo on the coarsening of TiMoC carbide ih high strength low alloy steels, , 0, 0, - (2013)
High Temperature Oxidation Behavior of FeMnAlC Alloy, , 0, 0, - (2013)
고강도 변태유기소성강에서의 수소거동, , 0, 0, - (2012)
High Temperature Oxidation Behavior of FeMnAl Alloys with High Al Content, , 0, 0, - (2012)
Influence of C and Mn Concentration on Manganese TRIP steel, , 0, 0, - (2012)
Research on high temperature oxdiation of Albearing light weight steel, , 0, 0, - (2012)
Spot weldability of high carbon and aluminum bearing TRIPassisted steels, , 0, 0, - (2012)
Effect of alloying elements on the growth of ferrite from austenite in multicomponent FeC base alloys, , 0, 0, - (2012)
Influence of alloying elements on thermal stability of TiMC carbides in HSLA steel, , 0, 0, - (2011)
Application of bainitic structure for bearing steel and acceleration of transformation kinetics, , 0, 0, - (2011)
제일원리 계산을 통한 TiMC MNb V Mo W 석출에 미치는 alloy 효과 분석, , 0, 0, - (2011)
Effect of strain energy on the coalescence in low carbon steels, , 0, 0, - (2011)
Effect of deformation on hydrogen behavior in TRIP steel, , 0, 0, - (2011)
Si 첨가 저비중강 열간압연재의 미세조직에 따른 냉간연성의 변화, , 0, 0, - (2011)
Role of Mo for TiC precipitation strengthening HSLA steel A firstprinciple study, , 0, 0, - (2011)
Austenite stability and mechanical behavior of Alcontaining low carbon manganese transformationinduced plasticity steels, , 0, 0, - (2011)
Anisotropy of Charpy properties in API X80 steels, , 0, 0, - (2010)
Plastic strain and varinat selection during diffusional transformation in steels, , 0, 0, - (2010)
Strain partitioning of retained austenite in TRIP steels, , 0, 0, - (2010)
The effect of external stress on the crystallographic relationship and variant selection of ferrite during diffusional transformation, , 0, 0, - (2010)
Design of low carbon low temperature bainite, , 0, 0, - (2010)
Microstructural effect on the stability of retained austenite in Mn TRIP steels, , 0, 0, - (2010)
The insitu observation of coalesced bainite, , 0, 0, - (2010)
Effect of retained austentie on strain hardening behavior of TRIP steel, , 0, 0, - (2009)
Controlling mechanical balance of advanced multiphase transformationinduced plasticity steel, , 0, 0, - (2009)
Microstructure and mechanical proeprties of 7Mn multiphas steel, , 0, 0, - (2009)
Microstructure and tensile behavior of metastable austenitic steels with high Mn content, , 0, 0, - (2008)
Effect of alloying elements and austenitizing temperature on hardenability of low carbon boron added steels, , 0, 0, - (2008)

Books

Research Activities

베어링강 최종 미세조직으로서의 베이나이트 적용 가능성 및 변태 가속화 연구, 포스코홀딩스(주) (2010-2010)
BAINITE TRANSFORMATION KINETICS INF HIGH CARBON STEELS, 포항공대산학협력단 (2010-2010)
인건비풀링과제, 포항공과대학교 (2011-2015)
FABRICATION OF CERAMIC-STEEL MATRIX COMPOSITE WITH IN-SITU PYROLYSIS REACTION IN MOLTEN STEEL, 포항공대산학협력단 (2011-2012)
(포항) CHQ재 원가 절감을 위한 저원가 성분설계 기술 (1/1), 포스코홀딩스(주) (2011-2012)
가열로 온도이력에 따른 합금 탄질화물 고용 거동 정량화, 포스코홀딩스(주) (2012-2013)
잔류 오스테나이트 형상제어를 통한 고강도 BAINITE-TRIP강 개발 가능성 탐색 연구, 포스코홀딩스(주) (2012-2013)
고AL계 고강도강의 확산 및 산화거동 연구, 포스코홀딩스(주) (2012-2013)
R_직접비_10037518_재료시험기, 포항공과대학교 (2012-2025)
FE-P-X강의 성분 및 열연 조건에 따른 미세조직 분석 및 현상 규명, 포스코홀딩스(주) (2013-2013)
준안정 오스테나이트 상의 미세조직 분석 및 현상 규명 탐색 연구, 포스코홀딩스(주) (2013-2014)
AUSFORMING에 의한 스프링강의 기계적 특성 변화 거동 규명, 포스코홀딩스(주) (2013-2014)
MODELLING HYDROGEN DESORPTION IN STEELS FROM MULTIPLE TRAPPING SOURCES: TOWARDS THE DESIGN OF HYDROGEN-RESISTANT STEELS, 포항공대산학협력단 (2013-2014)
(전사) 가열로 온도이력에 따른 합금 탄질화물 고용 거동 정량화 (2 / 2), 포스코홀딩스(주) (2014-2015)
초기조직에 따른 AHSS 소둔미세조직 및 PARTITIONING 거동 연구, 포스코홀딩스(주) (2014-2015)
열간압연 공정에서의 표면산화거동 예측 모델 개발, 포스코홀딩스(주) (2014-2015)
XRD PEAK 분석에 의한 강재 내 전위밀도 평가, 포항공대산학협력단 (2014-2015)
준안정 오스테나이트 활용을 위한 합금원소 영향 연구, 포스코홀딩스(주) (2014-2015)
고온 구조용 경량 내열 FE계 금속복합소재 특성 최적화, (주)대화알로이테크 (2014-2015)
냉각중 상변태에 의한 고탄소강 변태발열 정합도 향상 연구, 포스코홀딩스(주) (2014-2015)
초기조직에 따른 AHSS 소둔미세조직 및 PARTITIONING 거동 연구, 포스코홀딩스(주) (2015-2016)
열간압연 공정에서의 표면산화거동 예측 모델 개발, 포스코홀딩스(주) (2015-2016)
강재 내 수소거동 모델링 연구 동향 조사 연구, 포항공대산학협력단 (2015-2016)
R_직접비_10095194_MASS SPECTROMETER, 포항공과대학교 (2015-2025)
R_직접비_10083586_소형압연실험기, 포항공과대학교 (2015-2025)
R_직접비_10099167_REAL TIME X-RAY INSPECTION SYSTEM, 포항공과대학교 (2015-2025)
R_직접비_10100051_GAS CHROMATOGRAPHY, 포항공과대학교 (2015-2025)
R_직접비_10102034_AUTOMATIC ELECTROLYTIC POLISHING, 포항공과대학교 (2015-2025)
R_직접비_10102214_500ML STIRRED AUTOCLAVE, 포항공과대학교 (2015-2025)
R_직접비_10102233_THERMOGRAVIMETRIC ANALYZER, 포항공과대학교 (2015-2025)
R_직접비_10103181_부양용해용 유도가열 전원장치, 포항공과대학교 (2015-2025)
R_직접비_10104662_수소분위기제어 쿼츠튜브 이동가열로, 포항공과대학교 (2015-2025)
R_직접비_10105633_BENDING MACHINE, 포항공과대학교 (2015-2025)
R_직접비_10105739_LENTON 1600℃ FURNACE CRUCIBLE, 포항공과대학교 (2015-2025)
R_직접비_10105846_UV/VIS/NIR SPECTROMETER, 포항공과대학교 (2015-2025)
R_직접비_10110852_고속주조 주편 냉각 및 응고 SIMULATOR, 포항공과대학교 (2015-2025)
R_직접비_10111804_H F INDUCTION HEATER, 포항공과대학교 (2015-2025)
R_직접비_10116065_고성능 컴퓨팅 시스템, 포항공과대학교 (2015-2025)
고온 구조용 경량 내열 FE계 금속복합소재 특성 최적화, (주)대화알로이테크 (2015-2016)
고온 구조용 경량 내열 FE계 금속복합소재 특성 최적화, (주)대화알로이테크 (2015-2016)
연구개발과제[2015년 신설], 포항공과대학교 (2015-2036)
4.11219_1차년도 이월, (주)대화알로이테크 (2015-2016)
고망간 TWIP강의 저온 부식 특성 및 수소 취화거동 해석, 포항공대산학협력단 (2015-2016)
베이나이트계 장수명 베어링강 및 스프링강 타당성 연구(미래혁신과 FEASIBILITY STUDY), 포스코홀딩스(주) (2015-2016)
초기조직에 따른 AHSS 소둔미세조직 및 PARTITIONING 거동 연구, 포스코홀딩스(주) (2016-2017)
[기술개발비과제]초고강도 고성형성 강판 제조 기술 개발 동향 조사 연구, 포항공대산학협력단 (2016-2017)
열간압연 공정에서의 표면산화거동 예측 모델 개발, 포스코홀딩스(주) (2016-2017)
INFLUENCE OF NB ON SENSITIVITY TO HYDROGEN-INDUCED FRACTURE IN 1180 GRADE TRIP AND DP STEELS, CBMM (2016-2018)
SI함유 고경도강의 실험실적 제조 및 평가, 국방과학연구소 (2016-2019)
고온구조용 경량 내열 FE계 금속복합소재 개발, (주)대화알로이테크 (2016-2017)
오스테나이트계 고MN강의 석출 강화 기구 해석, 포스코홀딩스(주) (2016-2017)
학과공용장비_10103938_FLIR SC645, 포항공과대학교 (2017-2025)
학과공용장비_10123593_CARBON STEEL 박판용 압연기 제작, 포항공과대학교 (2017-2025)
나노 베이나이트 기반 기가급 강재 개발 탐색 연구, 포스코홀딩스(주) (2017-2018)
[기술개발비]초고강도 강판의 수소취성 연구 동향 조사연구, 포항공대산학협력단 (2017-2018)
EG 1180 TRIP강의 수소지연파괴 MECHANISM 및 추가 공정 조건에 따른 영향 규명, 포스코홀딩스(주) (2017-2018)
[전문]지식재산출원등록비 연구자별 과제, 포항공대산학협력단 (2017-2029)
석출물이 중망간강의 기계적 물성에 미치는 영향 연구, 포스코홀딩스(주) (2017-2018)
공정조건에 따른 AHSS 선택산화 모델링, 포스코홀딩스(주) (2017-2018)
오스테나이트계 고MN강의 석출 강화 기구 해석, 포스코홀딩스(주) (2017-2018)
열연 고탄소강 탈탄 및 내부산화 발생 MECHANISM 연구, 포스코홀딩스(주) (2018-2019)
고탄소 TRIP강의 미세조직이 성형성에 미치는 영향도 규명 (1/2), 포스코홀딩스(주) (2018-2019)
R_직접비_10108932_THE TEC X-RAY DIFFRACTION SYSTEM, 포항공과대학교 (2018-2025)
R_직접비_10108932_LEVER ARM TYPE CREEP TESTER SYSTEM, 포항공과대학교 (2018-2025)
R_직접비_10112906_LEVER ARM TYPE CREEP TESTER SYSTEM, 포항공과대학교 (2018-2025)
R_직접비_10121027_LEVER ARM TYPE CREEP TESTER SYSTEM, 포항공과대학교 (2018-2025)
R_직접비_10121027_LEVER ARM TYPE CREEP TESTER SYSTEM, 포항공과대학교 (2018-2025)
R_직접비_10122435_U DRAW TEST MOLD FOR SERVO PRESS, 포항공과대학교 (2018-2025)
R_직접비_10122896_LENTON 1400˚C VERTICAL TUBE FURNACE, 포항공과대학교 (2018-2025)
R_직접비_10123832_고온시차주사열량계(LABSYS EVO DSC), 포항공과대학교 (2018-2025)
R_직접비_10126669_열간압연기(PILOT 4HI-HOT ROLLING MILL), 포항공과대학교 (2018-2025)
R_직접비_10136532_금속 판재 인장압축시험기(SHEET METAL DEFORMATION), 포항공과대학교 (2018-2025)
1.2GPA급 비도금 기가스틸의 산세 및 소둔 조건에 따른 강종 내 확산성 수소 거동 분석, 포스코홀딩스(주) (2018-2019)
미래사회 기반 구조용 금속소재 강건/스마트 설계 기술, 한국기계연구원부설재료연구소 (2018-2018)
학생인건비통합관리과제, 포항공대산학협력단 (2019-2040)
FE-17% 방진합금의 상변태 기구 분석, 포스코홀딩스(주) (2018-2019)
기가급 TRIP강 소둔로 내 이슬점 제어를 통한 표층부 탈탄 및 산화 거동 모델링, 포스코홀딩스(주) (2019-2020)
HETEROGENEOUS 미세조직을 갖는 초고강도 고연신 MART강의 물성 상관관계 해석(장기기초과제), 포스코홀딩스(주) (2019-2020)
고탄소 TRIP강의 미세조직이 성형성에 미치는 영향, 포스코홀딩스(주) (2019-2020)
R_직접비_10041383_재료시험기, 포항공과대학교 (2019-2025)
R_직접비_10102539_TUBE TYPE FURNACE SYSTEM, 포항공과대학교 (2019-2025)
R_직접비_10124805_고온수평 열중량분석장치, 포항공과대학교 (2019-2025)
[4.17560_기술개발]기가급 TRIP강 소둔로 내 이슬점 제어를 통한 표층부 탈탄 및 산화 거동 모델링, 포항공대산학협력단 (2019-2020)
[4.17561_기술개발]HETEROGENEOUS 미세조직을 갖는 초고강도 고연신 MART강, 포항공대산학협력단 (2019-2020)
[4.17565_기술개발]고탄소 TRIP강의 미세조직이 성형성에 미치는 영향, 포항공대산학협력단 (2019-2020)
미래사회 기반 구조 금속소재 내수소 강건화 기술, 한국기계연구원부설재료연구소 (2019-2019)
기가스틸 전착도장 시 수소 거동 MECHANISM 규명, 포스코홀딩스(주) (2019-2020)
[4.18330_기술개발]기가스틸 전착도장 시 수소거동 MECHANISM 규명, 포항공대산학협력단 (2019-2020)
EFFECT OF NB ADDITION ON WORK HARDENING, BENDABILITY AND DUCTILITY OF 780-980 DP STEELS, CBMM (2019-2020)
EFFECT OF NB ADDITION ON HYDROGEN EMBRITTLEMENT OF HIGH STRENGTH SPRING STEELS, CBMM (2019-2020)
(신규)학생인건비통합관리계정(친환경), 포항공대산학협력단 (2019-2040)
HETEROGENEOUS 미세조직을 갖는 초고강도 고연신 MART강의 물성 상관관계 해석(장기기초과제), 포스코홀딩스(주) (2020-2021)
INFLUENCE OF HEAT TREATMENT CONDITION ON THE ULTRA-HIGH STRENGTH MULTIPHASE STEELS, 우석문화재단 (2020-2021)
R_직접비_10123935_수소분석기, 포항공과대학교 (2020-2025)
R_직접비_10145278_3D 측정 분석현미경(LEICA DVM6 A), 포항공과대학교 (2020-2025)
R_직접비_10148030_MULTI-SCALE MICROSTRUCTURE ANALYSIS SYST, 포항공과대학교 (2020-2025)
R_직접비_10148341_GLEEBLE 3500, 포항공과대학교 (2020-2025)
S_직접비_이성학, 포항공과대학교 (2020-2025)
S_간접비_이성학, 포항공과대학교 (2020-2025)
[4.19459]불균일 미세조직을 갖는 초고강도강의 물성에 미치는 합금서문 영, 포항공대산학협력단 (2020-2021)
1.2GPA급 기가스틸 SCC(STRESS CORROSION CRACKING)에 미치는 강내 함유 CR과 중MN의 영향 분석, 포스코홀딩스(주) (2020-2021)
유럽향 1.2GPA급 기가스틸의 高성형성 확보를 위한 미세조직 및 성분설계 연구, 포스코홀딩스(주) (2020-2021)
[4.19972_기술개발]복합조직 기가스틸 성형성에 미치는 미세조직 인자 연, 포항공대산학협력단 (2020-2021)
[4.19971_기술개발]초고강도강의 수소취성에 미치는 강중 합금원소의 영향, 포항공대산학협력단 (2020-2021)
증기터빈 로터블레이드용 630 OC급 페라이트계 내열강 및 부품 개발, 한국산업기술기획평가원 (2020-2020)
불균일 미세조직 기반 초고강도 고연신 자동차용 강판 제조 기술 탐색 연구, 포스코홀딩스(주) (2021-2022)
AL 도금 HPF 강의 도금 및 열처리 조건에 따른 계면층 확선성 수소 거동 연구, 포스코홀딩스(주) (2021-2022)
R_직접비_10150806_유도결합 플라즈마 분광광도계, 포항공과대학교 (2021-2025)
R_직접비_10114661_진공-가압 용해 및 연속주조장치, 포항공과대학교 (2021-2025)
R_직접비_10154764_ION BEAM MILLING SYSTEM, 포항공과대학교 (2021-2025)
R_직접비_10156404_QUENCHING DILATOMETER, 포항공과대학교 (2021-2025)
[4.21411_기술개발]AL 도금 HPF 강의 도금 및 열처리 조건에 따른 계면층 확선성 수소 거동 연구, 포항공대산학협력단 (2021-2022)
[4.21408_기술개발]불균일 미세조직 기반 초고강도 고연신 자동차용 강판 제조 기술 탐색 연구, 포항공대산학협력단 (2021-2022)
증기터빈 로터블레이드용 630 OC급 페라이트계 내열강 및 부품 개발, 한국산업기술기획평가원 (2021-2021)
저온 Q&P 공정에서 제조조건에 따른 미세조직과 재질변화 연구, 포스코홀딩스(주) (2021-2022)
[4.21880_기술개발]저온 Q&P 공정에서 제조조건에 따른 미세조직과 재질변화 연구, 포항공대산학협력단 (2021-2022)
DEVELOPMENT OF NB-ADDED HIGH CARBON WIRE ROD, CBMM (2021-2023)
PRECIPITATION BEHAVIOR OF YS-GUARANTEED NB-TI MICROALLOYED COLD-ROLLED STEELS IN THE PRODUCTION PROCESS, CBMM (2021-2023)
(광양) 기가스틸의 굽힘특성 향상을 위한 미세조직 인자 해석 및 제어 기술 연구 (1/1), [삭제]주식회사 포스코 (2022-2022)
[4.23151_기술개발](광양) 기가스틸의 굽힘특성 향상을 위한 미세조직 인자 해석 및 제어 기술 연구 (1/1), 포항공대산학협력단 (2022-2025)
(전사) 냉간 프레스용 TS 1.2GPA 및 1.5GPA 기기스틸의 응력/변형율과 수소취성 상관관계 도출 (1/1), [삭제]주식회사 포스코 (2022-2023)
(광양) 고온 소둔 생략형 페라이트계 기가급 강재 제조기술 탐색 연구 (1/1), [삭제]주식회사 포스코 (2022-2023)
R_직접비_10150018_투과전자현미경용 HEATING HOLDER 시스템, 포항공과대학교 (2022-2025)
[4.23614_기술개발](전사) 냉간 프레스용 TS 1.2GPA 및 1.5GPA 기기스틸의 응력/변형율과 수소취성 상관관계 도출 (1/1), 포항공대산학협력단 (2022-2023)
[4.23619_기술개발](광양) 고온 소둔 생략형 페라이트계 기가급 강재 제조기술 탐색 연구 (1/1), 포항공대산학협력단 (2022-2023)
(광양) 자동차용 기가스틸의 미세조직 기반 수소거동 제어 및 무해화 탐색 연구 (1/1), [삭제]주식회사 포스코 (2022-2023)
[4.24190_기술개발](광양) 자동차용 기가스틸의 미세조직 기반 수소거동 제어 및 무해화 탐색 연구 (1/1), 포항공대산학협력단 (2022-2023)
증기터빈 로터/블레이드용 630 OC급 페라이트계 내열강 및 부품 개발, 한국산업기술기획평가원 (2022-2022)
철강.에너지소재대학원-부서자체연구개발비[2022년신설], 포항공과대학교 (2022-2040)
(김지훈) 철강 재료의 결정 입계 특성에 관한 연구 : 편석과 결정학적 방위가 수소 취성에 미치는 영향, 재단법인한국연구재단 (2022-2023)
OPTIMIZATION OF NB PRECIPITATES FOR MINIMIZING HYDROGEN EMBRITTLEMENT OF PHS STEELS, CBMM (2022-2024)
(전사) 경량 철강의 후판 구조재 적용을 위한 응용물성 및 제조공정 최적화 연구 (1/1), [삭제]주식회사 포스코 (2023-2023)
[4.25334_기술개발](전사) 경량 철강의 후판 구조재 적용을 위한 응용물성 및 제조공정 최적화 연구 (1/1), 포항공대산학협력단 (2023-2023)
(기관단위)학생인건비통합관리계정(친환경), 포항공대산학협력단 (2023-2040)
R_직접비_10172734_ICP-OES, 포항공과대학교 (2023-2025)
R_직접비_10166404_MERCURY POROSIMETER, 포항공과대학교 (2023-2025)
증기터빈 로터/블레이드용 630 OC급 페라이트계 내열강 및 부품 개발, 한국산업기술기획평가원 (2023-2023)
FLASH 급속가열/급속냉각을 활용한 저원가 고성형 기가스틸 연구, [삭제]주식회사 포스코 (2023-2024)
4.24415_이월과제, 한국산업기술기획평가원 (2023-2023)
[4.26290_기술개발]FLASH 급속가열/급속냉각을 활용한 저원가 고성형 기가스틸 연구, 포항공대산학협력단 (2023-2024)
원가저감 및 재질개선을 위한 TRIP/DP강 신공정 탐색 연구, [삭제]주식회사 포스코 (2023-2024)
[4.26522_기술개발]원가저감 및 재질개선을 위한 TRIP/DP강 신공정 탐색 연구, 포항공대산학협력단 (2023-2024)
초고강도 특수강 압연소재 강화기구 분석 및 미세구조 평가, 국방과학연구소 (2023-2026)
INFLUENCE OF NB AND TRAMP ELEMENTS ON SHEARED/PUNCHED EDGE QUALITY OF HOT-ROLLED MICROALLOYED STEELS, CBMM (2023-2024)
INFLUENCE OF NB ON MICROSTRUCTURE AND MECHANICAL PROPERTIES IN MARTENSITIC PLATE STEELS, CBMM (2023-2024)
MULTIFORMITY기반 상반특성 동시 향상 위성체용 금속소재 개발, 재단법인한국연구재단 (2023-2024)
(광양) 자동차용 기가스틸의 수소취성 및 용접 LME에 미치는 첨가원소 영향 규명 (1/1), [삭제]주식회사 포스코 (2024-2025)
[4.28142_기술개발](광양) 자동차용 기가스틸의 수소취성 및 용접 LME에 미치는 첨가원소 영향 규명 (1/1), 포항공대산학협력단 (2024-2025)
MULTIFORMITY기반 상반특성 동시 향상 위성체용 금속소재 개발, 재단법인한국연구재단 (2024-2025)
증기터빈 로터/블레이드용 630 OC급 페라이트계 내열강 및 부품 개발, 한국산업기술기획평가원 (2024-2024)
4.26228/4.26317_이월과제, 한국산업기술기획평가원 (2024-2024)
원가저감을 위한 SCS 공정 제어 탐색 연구, [삭제]주식회사 포스코 (2024-2025)
[4.28845_기술개발]원가저감을 위한 SCS 공정 제어 탐색 연구, 포항공대산학협력단 (2024-2025)
4.0027443_이월과제, 재단법인한국연구재단 (2024-2025)
EFFECT OF CHEMICAL COMPOSITION AND MICROSTRUCTURE ON THE MECHANICAL PROPERTIES OF PRECIPITATION HARDENED HIGH STRENGTH COLD-ROLLED AUTOMOTIVE STEELS, CBMM (2024-2025)
NO재 SLURRY 확산 소둔시 내부산화물 생성 메커니즘 규명 및 예측 모델 개발, 주식회사 포스코 (2024-2025)
[4.29380_기술개발]NO재 SLURRY 확산 소둔시 내부산화물 생성 메커니즘 규명 및 예측 모델 개발, 포항공대산학협력단 (2024-2025)
DEVELOPMENT OF HIGH STRENGTH AUSTENITIC STEELS WITH A YIELD STRENGTH OF 380MPA AND COMPONENTIZATION TECHNOLOGY, 한국산업기술기획평가원 (2024-2024)